Regrouting Services and Benefits


Shower Regrout    Tub Regrout     Grout with Strong Mildew Resistance


Changing Grout Color    Highly Water Resistant Grout    Retile


Restor-It provides beautiful regrouting results to our customers in the Atlanta and Marietta area. Contact our office for more information about how we can help turn your housing into your home.


General Regrouting – FAQs


Our regrouting process is simple and easy, and will give your bathroom or kitchen that beautiful new look. Here are some frequently asked questions about our professional regrouting services:

Can I change my grout color?


Yes, there is a range of grout colors to choose from.

How long until I can use the space again?


Generally, you will need to wait 24-48 hours before using your shower or walking too much on your floor.

Can you regrout wall and floor tiles?


Yes, but not all tiles are suitable for regrouting. As a guide, the tiles must be at least 10cm, or 4 inches square in size. We cannot regrout mozaic tiles or unusually shaped tiles (ie round, hexagonal, octagonal etc).

Would there be any reason that my tiles could not be regrouted?


If there are too many loose / cracked or broken tiles.
If the tiles are less than 10cm or 4 inches square.
If epoxy grouting or concrete has been used previously.
If the tiles have been resurfaced previously.

What is Regrouting?


Tile regrouting is a process that will dramatically improve the appearance of a tiled area at a fraction of the cost of replacing the tiles. After all, it is not always the tile that makes an area look ugly but often the unsightly, discolored grout. By itself, the tile in a shower enclosure is almost maintenance free. With an occasional wipe-down, it can look good for years. Grout, however, is a different story—eventually it’s going to break down. Large cracks and crumbly chunks are alarming, but smaller fractures can be trouble too. Fractures, and stains that won’t wash out, may indicate spots where water is wicking in and working its way behind the tiles. Sooner or later, that water will weaken the adhesive that’s holding the tile or cause rot in the walls. When that happens, the only solution is to tear out the tile and start from scratch.

The good news is that if you catch it in time, you can quickly and easily give tiled surfaces a new lease on life—and a fresh look—by applying a new layer of grout.


The Process


Our tile regrouting process includes the careful removal of the existing grout between the tiles. This step utilizes diamond cut blades to scrape away the old grout. All existing caulk is cut out. Once these two steps are completed, the work area is vacuumed to remove dust and debris left from the grout removal step and all surfaces wiped down. The new grout is then spread using a grout float, which pushes the grout diagonally and into the vacant joints.The new grout will be a maximum performance grout which is highly stain-resistant and mold and mildew resistant. All excess grout and film is then wiped from the face of the tile with a damp sponge, rinsing it very often.

The final step after cleaning is to apply new caulk. The caulk is the weakest link between water damaging your walls and floors so it is important to apply it correctly. We thoroughly caulk between all tile wall planes. This will ensure that water does not get between your tiles and into your walls.